THE VEPR FORUM

Hey all,
Curious what all the cool kids are doing these days for an improved FCG. I've got a bit of money burning a hole in my pocket and am ready to spend some cash on the V12.
I've taken my hammer out and ground it down in hopes it'll cycle the weaker ammo, to no avail.
Thanks all!
Bob

G2 modified. Or OEM modified

_________________
Guns are worthless if you can't feed them....

Was that a question, or an answer?

I am faster with a Tapco G2 with my UG2 short pull/short reset trigger job than anything else that I have tried, ever.

_________________

Custom Saiga-12, Vepr-12, KS-12, and Lynx builds
(SBS and reliability are my specialties)
Cerakote and Moly Resin refinishing
AK100 installs
...and more

DIRECT ALL INQUIRIES TO...
evlutionz@yahoo.com

That was an answer. Evl does make my favorite trigger. I hope he brings an Evl UG2 drop in AK trigger to the market one day. Lol. He did my UG2 in my IZ 433a.

_________________
Guns are worthless if you can't feed them....

the problem is that the travel is tuned to each individual receiver. I do have a trigger design in mind that I want to eventually bring to light. the user will have to tune it to the receiver themselves, but I have figured out a way to make it nearly foolproof. It will do everything, speed and precision. Not sure why no one else thinks like that, but whatever, it leaves a hole in the market for me to exploit


Bob, my V12R Weapon Refinement service comes with a Tapco G2 with the UG2 trigger job... and a video of me raping your weapon It will run when I am done.

_________________

Custom Saiga-12, Vepr-12, KS-12, and Lynx builds
(SBS and reliability are my specialties)
Cerakote and Moly Resin refinishing
AK100 installs
...and more

DIRECT ALL INQUIRIES TO...
evlutionz@yahoo.com

Bob, Go to You Tube and look at the IZ 433a video EVL produced. Triggers don't get any better than that.

_________________
Guns are worthless if you can't feed them....

https://www.youtube.com/watch?v=3w9nDjvzwQg

Here's one.

_________________

Custom Saiga-12, Vepr-12, KS-12, and Lynx builds
(SBS and reliability are my specialties)
Cerakote and Moly Resin refinishing
AK100 installs
...and more

DIRECT ALL INQUIRIES TO...
evlutionz@yahoo.com

the best trigger is highly subjective or relative to the actual shooter. some people like the g2, other alg, others like the stock trigger. its a real toss up i recommend trying the g2 or the alg trigger. i know dissident arms sells a alg trigger and 4 range also sells a alg modded trigger. i have personally seen both and they are good in my personal opinion, that said evl. also has a good trigger as well, it is up to the user to determine what kind of trigger they like and what they want to do with the weapon specifically. i personally have the alg triggers in my vepr-12's.

Hmm... I was hoping for a more definitive answer that "All the cool guys are using the '_____' FCG".
But that would be too easy.
I was hoping for more of a drop in type solution. I've ground mine down to the point where there's not much left, and it made no difference.
Seems I'm not a gunsmith, after all. I'd hate the idea of spending a couple hundred, "dropping it in", and it making no difference.
After the amount of time, effort and money I've spent, the level of frustration has me to the point where I'm ready to sell it and find something else.
I've seen all the EVL videos. I've subscribed, so I got notification as soon as he released them. Yea, that awful darn sexy... no doubt... I can't deny that.